(1) The body of the 813 series pressure reducer is made of brass . The structure of two-stage decompression is basically similar to that of single-stage decompression, both of which are composed of valve ejector rod, pressure regulating spring, elastic film device, pressure reducing door and other components. The first-stage decompression system is mainly used to automatically reduce high-pressure gas to medium-pressure gas to a pressure of 2MPa, and then send it to the second-stage decompression system. In the secondary decompression system, when the pressure regulating screw is screwed, the decompression valve can be opened and closed to different degrees through the pressure regulating spring, the elastic film device and the valve ejector rod, so as to adjust the delivery of the first decompression system. The degree of decompression of the incoming oxygen or stop the gas supply.
(2) Kích thước ren của khớp đầu vào của bộ giảm tốc loại 813 là 23,4mm, kích thước lỗ bên trong của khớp là 7mm, đường kính trong của khớp ra là 4,8mm và tốc độ dòng chảy tối đa là 40m3 / h. Thân bình giảm áp còn được trang bị thêm đồng hồ đo oxy cao áp và đồng hồ đo oxy áp suất thấp, lần lượt cho biết áp suất trong buồng khí cao áp (tức là bình oxy) và áp suất trong khí thấp áp. buồng (tức là áp suất làm việc). Phạm vi của máy đo oxy cao áp là 25MPa. Phạm vi của máy đo oxy áp suất thấp là 0-1,6MPa.
Khi sử dụng bộ giảm áp loại 813, khi vặn vít điều chỉnh theo chiều kim đồng hồ, van giảm áp có thể được mở và oxy áp suất cao sẽ tràn vào buồng áp suất thấp từ khe hở. Do sự giãn nở của thể tích oxy trong buồng áp suất thấp, áp suất bị giảm, tức là hiệu ứng nén.
(3) Kích thước ren đai ốc của khớp nối đầu vào của bộ giảm áp hai cấp loại 813 là G 5/8, đường kính trong của khớp là 7 mm và có thể chọn đường kính trong của khớp ra từ 5 mm hoặc 9 mm tùy theo nhu cầu khác nhau. Phạm vi của máy đo oxy cao áp được cài đặt trên cơ thể là 0-25MPa và phạm vi của máy đo oxy áp suất thấp là 0-1.6MPa.